I have the most current version – 2.1.12.0 installed on my laptop and my desktop.
The laptop has been connected to the car 03 ls-1 vette but the desktop has not.
The table display on the laptop has 48 max for bytes. The desktop only 24 max.
The PID Table has more selections on my desktop than on my laptop.
What’s up with that?
03 LS-1 Vette, LGM Longtubes, BillyBoat Bullets, Halltech Stinger, Shaner ported & polished TB, LC-1 WB, Elite E2 Plate, BPP Shifter, DTE 4:10
I think this will help get what you need http://www.hptuners.com/forum/showthread.php?t=6117 fwiw when I was testing the standalone data logging I did 99% of it other then scanning the vehicle from the comfort of my home computer using the above technique...not recommended necessarily but for the most part works fine.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Great info.
That's alot easier than trying to plug the desktop into the car to "qualify" the supported PID's
thanks
03 LS-1 Vette, LGM Longtubes, BillyBoat Bullets, Halltech Stinger, Shaner ported & polished TB, LC-1 WB, Elite E2 Plate, BPP Shifter, DTE 4:10
Reply With Quote