I have read the vehicle tune file and saved it When I open it to view the maps are only showing
the top 1/2 of the numbers and only the first two rows down from the top.the rest of the table is all gray
I have read vehicle twice and same thing. only the top half of the number in the cells are visible
Any ideas have the pro interface and updated to version 3.2
vehicle is 2010 LS3 camaro thanks new to HP tuners this is first attempt
Post said tune file.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
trying to figure out how to post file
trying to figure out how to post file
Click advanced reply, then attachments to post files or logs.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
thanks hope this worked
Not sure what tables you are having issues with.
I can open all the tables just fine and see them all in the editor. I can see all the timing tables, fuel tables, MAF curve and so on.
3.2 is old software too, 3.6 is the newest out now.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Downloaded ver 3.6 before this last try still the same. must be something with that laptop? i will install on my other one and try thanks
Can you screen shot what tables you are talking about?
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Installed software on my other laptop and works fine. i will try to reinstall software on the other laptop. thanks for your help
stock tune.hptOriginally Posted by RicksPerf
Reply With Quote