Results 1 to 5 of 5

Thread: Final tune, maf ve and pe done, opinions please ?

  1. #1
    Advanced Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    217

    Final tune, maf ve and pe done, opinions please ?

    Hi All, final tune done I hope, care to take a look and make any pointers, thanks john
    Attached Files Attached Files

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    whats your list of mods, why your ignition is setp like that?
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Advanced Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    217
    Thanks, ignition is set up from a 2003 truck motor, I haven't looked at that at all, bit of porting work on heads, mild cam, ls3 exhaust manifolds and straight through exhaust system with balance pipe, john

  4. #4
    You still have a lot of work here. The main VE table is really rough. I didn't even look at the scan, but do you have a wide band? The timing is really, really low. I would do some reading/video watching, and get back after it. I will see if I can attach a copy of a tune of mine, just for reference.
    Attached Files Attached Files

  5. #5
    Advanced Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    217
    Thanks for the reply, I've only just installed my wideband. Your right, compared to yours it needs some work, I will start again and have another go.