What GM part # sensor should I be using for a 1998 2bar SD tune?
Thanks
What GM part # sensor should I be using for a 1998 2bar SD tune?
Thanks
A cobalt SS map sensor works, I don't have a part number.
Or you can buy a 3 bar EFI source MAP sensor that is plug and play for your LS1 harness. You can use a 3 bar MAP on a 2 BAR tune file if you wish. So long as the settings are correct for the MAP sensor, the computer won't care.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote