Erros when writing to one particular 06 Truck

[Josh_luther]

I keep having trouble when trying to write to one particular truck. It's an 06 chevy and I have tuned other 06 chevys and gmc's and never had problems.
I get errors even with a non active test write in low speed mode. The Vcm voltage on the bottom of the screen reads 0.1V but the gauge reads 12+. I took the lap top out of his truck and put it in my 04 and loaded a file fine.

I have seen post that ask for the vcm info log is this it?


Operating System: Windows 2000
Microsoft .NET: 1.1.4322.2032

VCM Suite Product: VCM Editor 2.1.12.0
VCM Suite ID: 00000A332A

Year/Models:
Chevy Silverado (V8) 2004
GMC Sierra (V8) 2004
Chevy Silverado (V8) 2005
GMC Sierra (V8) 2005
Chevy Silverado (V8) 2006
GMC Sierra (V8) 2006

ID: 00000A332A
Date: 10/12/04
Hardware: 1
Firmware: 306
Part Number: 0

Type: Chevy Silverado (V8) 2006
VIN: 3GCEC14Z66G213809
VCM ID: 110007936017
BCC: ????
ECM Seg 1 ID: 12606807
ECM Seg 2 ID: 0
ECM Seg 3 ID: 0
ECM Seg 4 ID: 0
ECM Seg 5 ID: 0
ECM Seg 6 ID: 0
ECM Seg 7 ID: 0
ECM Seg 8 ID: 0
ECM Seed: 3F73

[Chris@HPTuners]

if the volatge reads 0.1V it means the write/testwrite did not complete correctly. You will have to disconnect the battery if you cannot complete the write.

Do NOT try a write entire.

It is most likely the Onstar or radio causing the problems (try pulling the fuses). It seems GM introduced another breed of even more stubborn accessories in 06

Chris...

[Josh_luther]

We disconnected the battery and it started. I'll try pulling the fuse.