Results 1 to 5 of 5

Thread: 411 controller???

  1. #1
    Tuner in Training novaman996's Avatar
    Join Date
    Apr 2017
    Posts
    19

    411 controller???

    Everybody talks about the 411 controller..
    What is a 411 controller????
    99-02 is a P01 controller and the 03-06 is a P59 controller..
    Any clarification would be appreciated ..

    Richard
    Thanks Richard

  2. #2
    Advanced Tuner
    Join Date
    Feb 2016
    Location
    Texas
    Posts
    534
    P01= 0411 controller

    P59 is the newer controller. before the gen 4 E38 pcm
    97 ext cab short bed silverado 5.7 411 swap, edelbrock 29135 intake, lightly ported 906 heads milled .035 thou. factory press in rocker studs & rockers, comp 787 retainers & stock locks, ls6 springs. Comp cams 08-503-8 T56 swap

    86 SWB crate vortec 5.7/th350 The wife's truck

  3. #3
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,379
    It refers to the service # of certain P01 PCMs. Used in many different vehicle platforms in 2001 and 2002 and Vettes in 2003. The whole service # is 12200411 and will be printed on a label attached to the PCM.

  4. #4
    Tuner in Training novaman996's Avatar
    Join Date
    Apr 2017
    Posts
    19
    Thanks for the info...
    Thanks Richard

  5. #5
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,379
    And the other P01 PCM used in 1999 and 2000 vehicles was service # 09354896. It is just as capable as the 12200411 and you can put any 99-02 calibration in either PCM. They both interchange just fine. And around where I live both can be purchases for from $20 to $40.