Here is log from just now. only seeing low 80% throttle position. any idea why or how i fix this?
2017 z06
15% pulley
intake
cat delete
x pipe
Here is log from just now. only seeing low 80% throttle position. any idea why or how i fix this?
2017 z06
15% pulley
intake
cat delete
x pipe
maybe it is, different set of config channels.
throttle position sae 84%
throttle position 99%
pedal position 99%
also looks like im getting 7-8* of timing pulled out. so it appears it pulls based on manifold temp, not inlet temp
bump
if your torque model is wrong it will close throttle and retard spark to help output match up with expected power.
Driver Demand
Virtual Torque Editor helps you edit your torque model coefficients
Peak Torque
are your main areas to recalibrate.
You are correct in your findings. The throttle is indeed all the way open. The approximate 84% is WOT.
Also on the LT4 cars the manifold air temp is what is referenced for the inlet air temp multiplier.
www.crawford-racing.com
Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.