Originally Posted by
sprinto7
OK, I got my switch to "learn" and operate correctly. My switch is attached to an E78, but the setup is with a RWD Trax 1.4 turbo engine and an inline T5 transmission so NOTHING is standard. I broke the first switch by having too much travel on the switch lever. The second switch needed less travel than I thought it would, actually around 40 degrees or less. Once the travel was centered on that travel, I just held the pedal on the floor, held the Clutch pedal learn button down till it changed color, turned the ignition switch off, let pedale up, turned ignition switch back on and logged. The switch shows passed, values go up and down. Pedal shows pressed/up. All appears to be good.