-
Tuner in Training
2016 Hellcat charger boost limits ?
car has upper and lower pulley setup should make about 17-18 psi the bybass valve opens and dumps it down to 7-8psi I got all the air flow limits set hi already the only thing I did noticed was the slowpath torque value jumps from 2 to 7 when it does it. does anyone have a list as to what these values are for?
-
Tuner in Training
-
Tuner in Training
id 1000s and mix 50/50 c16/pump
Last edited by spoolin342; 11-13-2018 at 06:05 PM.
-
Tuner in Training
There is numerous tables you would have to adjust other then airflow tables. Torque management tables need to be adjusted also.
-
Advanced Tuner
I've done 21-23 with a stock blower before....don't do it...I don't recommend it.
-
Tuner
Check the cat temp tables. I had one at 17psi going into cat protect and dumping boost.