Livernois has done a few of these. You might give them a call.
Livernois has done a few of these. You might give them a call.
2012 Mustang GT with S/C
4Runner with S/C
Turbo/NOS Hayabusa - 320RWHP
I'm having problems reading my 2017 Fusion Sport 2.7L V6. What ECM code do I use? Thanks!
2007 powerstroke, 6.0 not sure which ECM to select! Please help!
Thanks
ford pcm.JPG
2018 F150 5.0 I have 3.7 beta. Doesn't recognize the pcm?
Disregard
Its working now.
Last edited by MadMan; 05-25-2018 at 11:13 AM.
2008 Ford Focus 2.0L?
Hello for a 2017 f150 3.5 (non ecoboost) what controller I must to use?
Protocol Info: ISO 15765-2, CAN, 500 kb/s
ECM: 7E8, CAN
VIN: 1FTSS3ES1ADA85570 - 2010 Ford, 6.8 L, 10 Cyl
Calibration IDs: TVAM1G2.H32
Calibration VNs: 5C174E10
Basic PIDs: 44
18 f150 3.3?
Hello?
2018 f150 pcm tc-298???
Protocol Info: ISO 15765-2, CAN, 500 kb/s
ECM: 7E8, CAN
VIN: 1FDFE4FS2BDA49252 - 2011 Ford, 6.8 L, 10 Cyl
Calibration IDs: TVAP2N6.H32
Calibration VNs: A57C2CF5
Basic PIDs: 43
This is part of the infolog for a 2011 Ford E450
I selected Green Oak 1728K to read out the file because it was the only one that would read it
Support emailed me and said I selected the wrong controller and instructed me to use Spanish Oak 2048K and re-read the file - this is not working for me (using the MPVI2 interface)
Anyone have some insight on this problem?
HP Newbie II
Just purchased a P59 for an LS series Turbo build, however the board states P01 on the lower left. Is this a give away that I received the wrong PCM?
Trying to read a 2017 Fp350s (ford performance Racing mustang)
Pcm# GR3A-12A650-BUA
SW# FHVR2_TS Finial_A
There in No Vin#All yyyyyyyy
What would read this?
What is TCM for 2010 Explorer Sport Track 4.6L 3V with 6R80?
Creation Date: 12/17/2018 10:27:00 PM
VIN: 1FMEU5B81AUA44282
2010 Ford Sport Trac XLT, 4.6 L, 8 Cyl
Hardware: Spanish Oak 1024K, Ford
VIN: 1FMEU5B81AUA44282
OS: JPCH1A6
I read the PCM file and licensed it assuming it was a 5R55, will I have issues when I read the TCM for licensing?
I have a 2013 Raptor with a Bull Dog tune I am trying to adjust transmission but it wont read or download tune from truck. Is there a way, I used the copperhead, it reads but the locked up? Thanx