Hey guys. im still kinda new to the board so im not quite sure how to post files on here so ill start with whats goin on. I just installed a comp 222/224 @050 with a .566/.568 lift. i got a lunati valvetrain kit and replaced my vavle seals,dual honeycomb springs, and all the little stuff. The only thing i didnt replace was my valves, lifters, rockers and rods, which, rods will be somewhat soon since they have quite a bit of flex but im not hot rodding any time soon. I also repleaced my converter with a TCI 2400 Stall Converter So anyway, i did somewhat of a base tune on my base RPM and Airflow tunes and i got it to where it wont stall, now im having a problem in the 3000 rpm range. i know having a higher stall itll take a little more umph on the gas pedal but because of the tune not being quite right. so... any help on how to get the file or any ideas on where to go would be great.