Pretty simple tune. 2017 C7 Z06 with M7, long tube headers, no cats, Halltech CAI. The throttle blade will not stay open 100% at all rpm when making pulls on the dyno. It will start off near 100% at 2000 rpm, then above 3000 rpm, it will start to close to the 60% range. By 4500 rpm, it is open 100% and stay that way for the rest of the pull. I have tried stock torque table up to maxing out the torque table with no luck. I have worked the Driver Demand tables from stock to taking the 100% area to 3-4 times its original value, but it makes no difference. Perhaps it's something I missed in the tune or something that's missing int he software. I am on V3.22.115. Tune and dyno log are posted. Any help is appreciated.