Need Help With Setup/Config

[big_sapper]

I'm heading to the track tomorrow with my new (to me) 2004 Corvette. I'm not having much success with getting my configurations setup as I want to log my runs.

Can someone help me out with config settings for an LS1 P59 PCM? I'm also running an AEM 30-0310 X-series wideband.

[MakesBadDecisions]

MPVI pro or standard?
Might have to go with the egr/ac 5 volt trick or do the serial into USB option. Never tried the USB option but have had success with the 5 volt trick. Problem is double checking the WB readings without the gauge

[big_sapper]

v2 Pro

[MakesBadDecisions]

and you have the green/black (CAN L) going to yellow and white/black (CAN H) going to the Orange on the pro-link

with everything connected make sure to repoll and the scanner should pick up the wideband as another controller.

[big_sapper]

I didn't hook up the AEM. My installer had these instructions, so I'm assuming he did the same.

[MakesBadDecisions]

Does the scanner pick up the controller when you re-poll?
Sometimes its better to trust but verify the install than to assume.

[MakesBadDecisions]

I use 2 of the same AEMs on my personal truck using the CAN H and L at the OBD port. You should be able to connect with the scanner and re-poll and see the screen similar to the one in the picture i attached. When using the prolink you have to go down and choose it.

Hopefully this helps

[big_sapper]

OK, thanks for that screen shot. Brain fart on my part. WO2 is reporting now.

So now my config file isn't reporting most things because it's based on my old C7 Corvette. I have a C5 now. Is there a base/default config I can use for my C5 P59 PCM? I can add the wideband to that one.

[MakesBadDecisions]

Here is basic channels list that contains most of the important stuff. If automatic trans more stuff is needed.

[big_sapper]

Thanks! Much appreciate your help!

[MakesBadDecisions]

If you get a short log and drive with everything working and post it I can help you build the charts and graphs

[big_sapper]

I'm just going to log my time trial passes tomorrow.

[MakesBadDecisions]

Ok.
If you have time it might be worth making sure the channels log correctly and if there is anything else it might need