I've never used the Calculator built into HP Tuners and I'm currently working on a 2015 Mustang GT with 80MM turbo the car runs great up top and at idle but certain areas during part throttle i'm seeing torque errors in my log. The car originally was on a dyno and they tuned the torque tables but once we got in on the street we noticed some issues during part throttle. I took one of the Mapped points that the issue was happening in and reduced torque by 10 in load areas .20-1.60 load using the calculator then hit the calculate inverse button and my 3d inverse table has 0's in certain areas anyone else have this issue?
example.PNG