-
Tuner in Training
Take a look at this file please
A guy sent me two ecms that he wanted the vats deleted and rev limiter changed. So i did what he asked and sent them back but nether one will work. Tested the harness with a ecm froma runny buggy and works fine so we know the harness is good. What else to i need to do? Disable starter fault checks? One was for a 2.2 and a 2.4 09 and a 10
-
Tuner in Training
-
Tuner in Training
-
Senior Tuner
Did you do a write entire back to the ECU when you disabled VATS?
-
Tuner in Training
-
Tuner
Disable "starter fault checks" in operating system menu.
-
Tuner in Training
I talked to you before, give me a call. Steve