I'm installing a remote start in my 2008 sequoia and would like to disable the chip key security so it can be started with a standard key and I wont have to install a bypass.
Where do I look in the software to do this?
Thanks!
I'm installing a remote start in my 2008 sequoia and would like to disable the chip key security so it can be started with a standard key and I wont have to install a bypass.
Where do I look in the software to do this?
Thanks!
Is it normal for the "os" and "system" menus to come up blank? I was told that's where the vats would be but they are blank.
Try under system??? Thats where it is for GM...
Daily Driver= 2003 BMW 330xi
Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
Truck= 2007 Chevy Silverado 1500 LT LY5 4x4
Thanks for the reply! When I click on system the window comes up blank with no options. Not sure if that's how it is on toyota? Also the OS is blank
Daily Driver= 2003 BMW 330xi
Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
Truck= 2007 Chevy Silverado 1500 LT LY5 4x4
No I'm just using the latest software, I'll try the beta. Thanks!
Tried the latest beta and get the same results, guess I will have to wait till tomorrow to talk to someone in charge of the software.
Got a response from hp tuners and was told that it can't be turned off yet. Hopefully they can add it in a future update.