This is a log of the idle with engine warm. The first minute is with the forced open loop enabled with fuel trims cleared. About halfway through i re-enabled closed loop and re-cleared my trims.Am i just splitting hairs here? To me the trims are good but my O2 sensors seem lazy.The cam is a little bigger and more duration than TSP stage 3 cam. My torque advance is in the + teens now. I've tried to adjust my VT in the idle region but it has no effect on it. So im guessing its in my idle torque settings.
I'm running MAF only. It's my understanding that even though im MAF only it still looks at my VE regardless??