2013 Ford F150 5.0 V8 Coyote. Got the cum-whatever error, can't edit, must email under copperhead? I'm I missing something other than emailing it?
2013 Ford F150 5.0 V8 Coyote. Got the cum-whatever error, can't edit, must email under copperhead? I'm I missing something other than emailing it?
Read the file on a 2019 mustang gt TC-298 but I am not allowed to edit or view the file.
Cannot read 2019 5.0 with TC-298B, used TC-298 but can't edit file..
09 LNF: K&N Cai, ZZP IC, Injen IC piping, 3bar maps, efr 6758 (440whp!), Zeitronix E85 gauge, Innovate LC-1, WOTbox, HPTuners/Selftuned
2019 Ford Taurus Limited
hi i am trying to read a 2016 edge 3.5 v6 non ecoboost. What protocol i should use?
Thanks
hello,
I have a 2010 e450 with a v10 I am trying to read but says (unknown controllers detected) any help on this one?
I have a 2010 ford e450 with a 6.8 v10 it tells me (unknown controllers detected) when I try to read it.
I need to tune a M-6017-463V Ford Controls Pack. The computer that came with the kit was damaged by owner's installation, something to do with a sawsall. Therefore I can't read the file from the ECU. Does anyone have a read of that?
Thanks!
2014 FORD TAURUS Police - 3.7L AWD
KHCT2F5
2017 V6 mustang auto???
Tengo un escape 2012 abra soporte de hardware solo veo 2011
hi..need some insight on pcm identification
ford escape 2.3 xlt
ConnectionMethod: USB
ID: 2075967891
HardwareVersion: 1.4.0
ManufactureDate: 21/2/2020 8:47:26 PM
PartNumber: 6230
FirmwareVersion: 3.0.30
PoweredOnTime: 00:00:49
VehicleConnectedTime: 00:00:05
VehicleDiagnosticConnector: 1
Protocol Info: ISO 15765-2, J1962: CAN, 500 kb/s
ECM: 7E8, CAN
VIN: PE2ET77161SB03073 - 2001
Calibration IDs: L3D5EE000L33N051
Calibration VNs: 0C532B09
Basic PIDs: 30
Trouble Codes:
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, CAN Listener
2019 ford F-Series F-250 6.7 L, V8
1FT7W2BT9KED05146
operating system KC3A-14C204-ASG
Working on 2014 Focus Titanium 2.0 L N/A Need to know which TCU to select please and thankyou
2020 Ford Mustang GT..? Is this thread even supported still?
I need the hardware number for a Ford Escape
2010 XLT 3.0L V6
ECM: 7E8
Calibration ID: JSBM7FE.H32
Calibration VN: 18EFC4FF
Thanks.
Just curious if you can help me with this.
I have 2017 ford explorer sport 3.5 ecoboost I cant read
I've tried the following
TC-1767A
TC-1791-3M
TC-1791
TC-277
TC-1791B 3M
They all failed instantly
TC-1797 will read
When opening says.
Validate checksum failed. You will be unable to save or flash this file
Definition failed to load. You will be unable to edit this file. contact support
thank you appreciate the help in advance
2009 G8, L76, TSP F35 Cam, 6L80, 3.27 Gears
2004 Trailblazer, LQ9 408 Stroker, TSP Blower Cam, 4L80, 4.10 Gears