Newbie here tuning my 09 CTSV E67 via the LTFT STFT method, no wide band currently on the car, mods are full exhaust (headers/offroadpipe/Corsa sports), and Corsa cold air.
No problems setting up the tune to data-log or data-logging but when I go to change the VVE I get,
"The following zones: 17 23 29, are not supported by the data provided. Consider changing your axis to include the range of all the zones boundaries for the calibration. Calculating the coefficients with incomplete data could result in undesirable data."
And those zones are missing. My E38 Avalanche has it all there though.
What's my next move so I can add my changes and flash it? What do I have to alter?
Edit: and yes I set up my histogram axis and column to match the VVE table but those zones aren't on my VVE
E67.jpg