Noob to HP Tuners so go easy....
I have an E67 crate swap ECU (OS 12638778) on an LS3 running an Edelbrock supercharger. Trying to tidy up fueling to bring the ST and LT fuel trims into line.
FIRST--I can't find a channel that reads actual A/F ratio from the widebands. There is Air-Fuel Ratio Commanded, Equivalence Ratio Commanded and O2 Voltages--but nothing for actual A/F or Equivalence ratio (even Lambda). I've repolled and repolled to look for something. What am I missing?
SECOND--I can't find a basic VE table, fueling table (pulsewidth) or even A/F table. I'm used to working with these in a FAST or Holley SD systems, but its not present here. Am I missing something? What defines the target A/F (equivalence, Lambda...) ratio that the system is trying to hit? Is it even doing that?
THIRD--is there a book, website, YouTube channel or online course that I can dig into to learn how to tune with HPT on this E67 and its OS?
TIA for any assistance.
THANKS
G