Originally Posted by
Woodepic
Another issue lol:
I'm having trouble getting my launches above 3000 rpm. I currently get about 3000 rpm with a stall speed of 750, and limiting my slip torque to 700nm. Also, all my gears' max torque is set to 850, just like that template file.
However, when I raise the stall speed and the maximum slip torque all the way to 900 and 850 respectively, I still cannot go above 3000rpm. Any ideas? (I've also tried raising the 1st gear max torque to be higher, but it doesn't work)
I have rather sticky tires, so I wanna see what it takes to get some slip haha