Complete noob here, so please go easy. Hopefully I'll get my tune file attached.
Notes about vehicle:
1998 S10 with stock 4l60e, running a 2000 silverado 6.0, ecm & harness.
The engine, ecm and harness I'm using are from a 2000 silverado that had a 4l80. I'm getting the p0717, even though I changed the trans type to 4l60 which I believe didn't have an ISS in 2000. Do I need to do a segment swap to remove the ecm looking for the ISS? I repined the tranny connector to run the 4l60 following the instructions on lt1swap but kept the ISS wires connected on the pcm side (my thought was when I destroyed the 4l60, I'd put in a 4l80 and the ISS wires would be there already). Is there something I didn't do correctly, or missed? I've only driven this truck out of the garage, so I can't say how it's shifts but the speedometer worked
1998 s10 2015-08-17 Rev B.hpt
Any help is greatly appreciated!