Yes, TrackAddict has included
some enhanced parameters for GM vehicles. These were developed prior to the inclusion of HP Tuners IP, so they are more limited and generic than what you'd find in VCM Scanner, and are provided on an as-is basis. We also have an MPVI2 firmware update coming that will greatly expand upon this for MPVI2 users, but I don't have a date nailed down for that yet...
In the meantime, there are two ways to access what TrackAddict has today:
1) Use an MPVI2 with TrackAddict for Android. This is a free bonus for our MPVI2 users.
2) Use the "Pro" version of TrackAddict for iOS. Note that 3rd party devices may have varying success with these enhanced parameters.
Here's the list of GM parameters that we'll try to detect in the current version of TrackAddict (as of July 1, 2020). What's actually available or working from this list will vary depending on the vehicle:
Code:
Accelerator Pedal position
Brake Pedal: off/soft/hard
Clutch Pedal
Oil Temp
Barometric Pressure
Commanded Air/Fuel Ratio
Knock Retard
Cycles Without Emission Fault
Cycles Without Other Fault
Mileage Since Code Clear
Fuel Level
Oil Pressure
Transmission Fluid Temp
Gear number and/or ratio
Steering Wheel Angle (early C7 Corvettes, maybe some others)
Individual Wheel Speeds (early C7 Corvettes, maybe some others)
High-Res Vehicle Speed (early C7 Corvettes, maybe some others)