So i got an old APR stage 3+ kit from a guy a while back and kind of modified it. I am still using the APR injectors, the APR exhaust manifold, and the APR MAF housing. On my first engine (ran 30 psi on stock motor for over a year) i ran the stock housing and I could feel it choking up top. People told me over and over again.. saying it was impossible to get the MAF scaled properly and just to run the stock housing. Well I am one for challenges so I spent months trying to figure out how to do it and got it to work pretty well. So on my second and third engines (I am on my third engine, 4th trans, and 2nd turbo lol) I ran the APR MAF housing. I have built every inch of my car myself and tuned every file myself as well.. There has been some ups and downs, but its been fun and rewarding, especially now :-). But here is a link to the MAF housing I am running (Except mine is powder coated gold). I will get you another log after work as long as its not raining. Thanks again man...
https://images.goapr.com/T3100061_012.jpg