Tuning a 2007 TBSS with a turbocharged 6.2 liter LSX376/525 crate motor. Cam has been changed to a turbo specific cam. Yank all the timing out of it, .78 Lambda... whenever it crosses 150'ish KPA, knock is detected. Noticed that the boost is creeping badly BUT when it crept to 15psi, the knock was actually going away.
So Ive been trying to desensitize the knock sensors. I read an old post about multiplying the base attack table by .5 and the decay rate by 2. This post was written about an older version of HPT. Im running 4.8.7 AND I tried the latest beta BUT I cannot find these tables. Can someone direct me to where these tables are located in 4.8.7?
Thanks in advance!