Recently took the plunge and did my first LS swap in my76 Buick Regal and I used a 109k mile L96 with a 6l90E from a 2010 Express 3500 van. All is going well and I have successfully gotten the car driving and running quite nicely using an LS3/LS7 MAF and the MAF calibration data and wiring from a 2013 ZL1 camaro. The car is running great with the LTFT and STFT disabled exactly as show by the eleventy-billion youtube videos and searches. The directions from Goatrope's gen IV video and I followed directions to the letter.
The issue that I am struggling with has been discussed but after my searches, I never could get it figured out. I can see the tables when I go to log and the cursor jumps around but there is never any data in the fields. I am not a stranger to the search feature either. I have found a bunch of other threads but nothing seems to work. I figured that I would ask here before I go emailing HPtuners with the issue.
Someone has got to know what I am doing wrong.
I do not have a wide band and maybe that is the issue. I really am at a loss as to what the problem is though and I just want to finally start dialing my swap. I am running the standard HPTuners software with the MPVI2.
Hopefully no one is annoyed that my first post here is a question but I am definitely at my max frustration with this issue. I have come this far with my swap and it is not about lazy at all. I have done everything myself and aim to learn how to tune rather than taking my friends advice to go pay someone to tune it for me.
Thanks for any help in advance.