Originally Posted by
smokeshow
Part 2 coming soon...
If you have time smokeshow, could you give these a try and tweak them with some of your tricks...
Change the <2 term to change the aggressiveness of the filter on throttle changes
Code:
Closed Loop
ITT < 60degC AND Ignore a shift / torque management event for 0.5s either side AND Steady state throttle AND Fuel Trim Cell in closed loop run
[6215.241]<60 AND [2517.161.avg(500)]=0 AND [2517.161.avg(-500)]=0 AND (abs([50090.156.slope(1500)])+abs([50090.156.slope(-500)]))<2 AND ([6310]=7 OR [6310]=9 OR [6310]=14 OR [6310]=15)=0
Code:
Open Loop
ITT < 60degC AND Ignore a shift / torque management event for 0.5s either side AND Steady state throttle AND Fuel Trim Cell in power enrichment 1s after entering PE and 1s before leaving PE
[6215.241]<60 AND [2517.161.avg(500)]=0 AND [2517.161.avg(-500)]=0 AND (abs([50090.156.slope(1500)])+abs([50090.156.slope(-500)]))<2 AND [6310.avg(1000)]=9