hello guys! i want to introduce myself. I've been tuning for 5 years typically during the summer/spring months as i spend my winters trying to educate myself as much as i can from HP academy, The Tuning School programs (Ford 3v/coyote & Hemi platform), and following along on here as much as possible to better myself when I am off work. I've gotten myself my first EB a few weeks ago. It is a 2016 F-150 with the 1st gen 3.5. I've opened up the tune and I've done at best minute changes. The platform is extremely confusing in many aspects and much different then the mopars I typically program, so please do excuse me if I've made any mistakes in this base tune i will be sharing. I'm perfectly OK with any type of input (even if you call me out of a mistake in tune) because I want some insight from you guys and any possible help as things are much easier if someone can look directly with my platform and critique it as a base to make sense of some things for me. Some aspects such as the LI/PI, wastegate DC, control of drivers demand, and tweaking torque tables as I've seen some lower and some raise in controlling boost. Any help with be greatly appreciated as well as links to any post that prehaps I've missed! thanks guys! Also please let me know if any channels are missing from my layout for scanner as well. 2016 F150 Base1.hptGem1 3_5l .Channels.xml[ATTACH]