Originally Posted by
PbFut
I must be missing a trick or two.
VCM Scanner 4.9.762 and Firmware 3.1.8 (Alpha Firmware)
Still can't edit the channel list on the standalone log config and the pro window says "Failed to open interface"
I can standalone log the default channels and read the logs in the MPVI2 Data Logging window.
I can open the MPVI2 Pro Data Logging window
I cannot instruct the interface to log desired channel list.
Hitting the write Config in the Pro window returns "Failed to open interface" on the status bar.
Erase, Write and Read Channels in the Standard log window return complete and I can save the logs.
Read Config and opening the subsequent saved file returns a correct channel list when I open the saved channel config file so it appears the channel configuration at least partially saves on the interface.
The interface just seems to not follow the config list instruction.
I opened a ticket and received the Alpha firmware as this thread indicated the Alpha version may correct the issue but no luck. I still have the same issue so I am beginning to think I am doing something wrong.
I am running VCM Scanner 4.9.762 and Firmware 3.1.8
Any suggestions for this very new to HPTuner frustrated user.