Exchanged my MPVI Pro for the MPVI2 Pro. 2006 Corvette, LS2 Convertible. My first and subsequent attempts at reading the ECM with the new MPVI2 failed as I could not turn power on (ACC mode) with the MPVI2 plugged into the OBD2 Port, receiving the message "NO FOBS DETECTED" from the DIC. Batteries in both FOBS are new and test good. No cell phone or Blue Tooth interference, all doors closed and nothing to interfere with the FOBS connectivity or performance. However, by plugging the FOB into the glove box transmitter/reprograming slot, I am able to turn power on (ACC) and read the ECM. I have not tried to use the scanner but assume I will probably have to start the car and then plug the MPVI2 into the OBD2 Port in order to data log or scan vehicle performance. Has anyone else experienced this problem?