Been playing with this truck for way to long now. Its a little 218/227 cam and he added the 6.2L intake and throttle body. The crazy thing to me is that anything over about 35% pedal sends the throttle body up to 50% or more and KPA goes to 100. I was successfully backing this down with the pedal command table (2% at a time) and then it started going into reduced power mode of course. I haven't had this much trouble with Gen V's with bigger cams but they were manual trans. The biggest issue is the jump in kpa obviously sends the truck into full boogie at low speeds. Hopefully someone smarter than myself and my buddy can tell us wtf I am doing wrong
Slade_Cam_MAP.hplSlade_Base_15-Silverado-C.hpt