I went into problem which is more visible when i install larger TB.
Stock TB starts closing at 7600 rpm and is not closing as much as Bullit TB
Bullit TB starts closing at 7300 rpm and it's closing more than GT TB.
No errors, it's always driver demand tq source, but DD desired is getting lower when rpms are close to above, no matter what DD tables are set to request, may be rocket sky.
Not related to tranny as it happens in auto or manual, not related to any available RPM limits as i tested them set rocket sky, not related to torque/inverse tables as i adjusted them also.
Attached log from Bullitt, same happens on GT.
i reported it some time ago to HPT, but they can't find for now what's causing that.
Anybody experienced that? Solution?
08. dyno.hpl