Results 1 to 3 of 3

Thread: 2000 Mustang GT Tach Speedometer Failure with HP Tuners MPVI2?

  1. 07-02-2021 #1
    360glitch
    360glitch is offline
    Potential Tuner
    Join Date
    Sep 2018
    Posts
    2

    Question 2000 Mustang GT Tach Speedometer Failure with HP Tuners MPVI2?

    I am currently working on a 2000 Mustang GT (4.6L 2V MT) and have had trouble with the the tachometer and speedometer shutting off with the HP Tuners MPVI2 plugged in. When this occurs the data feed to VCM Scanner also fails. The issue is not present when the HP Tuners MPVI2 is not plugged in. Is there some sort of compatibility issue that I am not aware of? I've checked the applicable fuses on the car and everything seems to be good to go. Have also confirmed the the voltage from the car is good.
    Reply With Quote Reply With Quote
  2. 07-02-2021 #2
    decipha
    decipha is offline
    Advanced Tuner
    Join Date
    Mar 2010
    Location
    New Orleans, LA
    Posts
    630
    the obd2 bus is getting bad commands from the mvpi2 and cutting out
    Reply With Quote Reply With Quote
  3. 07-02-2021 #3
    360glitch
    360glitch is offline
    Potential Tuner
    Join Date
    Sep 2018
    Posts
    2
    Quote Originally Posted by decipha View Post
    the obd2 bus is getting bad commands from the mvpi2 and cutting out
    Thanks for the insight. Perhaps this is due to VCM Scanner being setup incorrectly?
    Last edited by 360glitch; 07-02-2021 at 07:12 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »