use the run position, but make sure its as far forward as you can get it with out starting the truck.
use the run position, but make sure its as far forward as you can get it with out starting the truck.
I got the 03 to read after a few tries in low speed mode. I wish we could get a resolution on this soon. Even if low speed works first try, it's still about 25 minutes just to do a read. I have not yet had trouble writing a calibration on 03 or 05.
2005 Sierra Z71 SLT CCSB (LM7)
STS GT67, LPE GT 2-3, ASP Pulley, Delphi 42#, A'PEXi AVC-R, PLX SM-AFR, FLT Level 5 4L65E, PI Vig 2600, HP Tuners with 2-Bar SD OS (Plus some smaller mods)
Support our Troops
Yup, same exact problem I have. I have not tried reading another vehicle yet. I was hoping to this last weekend, but was not able to make it out to the local GTG we had.
I would be happy to be able to have a check box or something to just read the VCM or the VCM and TCM. I will rarely read the TCM at this point, and if I get the 6 speed upgrade, sounds like I won't be able to read it at all.
Jon
2012 Ram 3500 6.7 Cummins with Banks CAI, intake tubes, intake horn, grid heater/EGR/DEF delete, 4" Straight pipe
2017 Jeep Wrangler Rubicon Unlimited, Stock - but looking to change that
What happens if you guys disconnect the TCM for reads?
it would probably just cancel the entire read unfortunatly
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Did a 02 this morning
under 7 minutes.
But,I can't edit the file,not supported.
is this the error you came across when trying to edit it? http://www.hptuners.com/forum/showthread.php?t=2929Originally Posted by Motion427
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Yes, that's the error I received.Sent to support.
still waiting......
Thanks
it just means they havent added that particular definition file yet, mind posting the file? If I can open it with my beta version I'll send you the link to try out
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Your more than welcome to have a look,I know everybody is busy,I'll have to wait my turn LOL......
Last edited by Motion427; 12-20-2006 at 01:22 PM.
have a look
I also tried it with 2.1.15 Beta.
No go....
yeah, looks like Chris will have to hook you up...im not able to open it with the latest beta
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Thanks for trying!!!
I did another 03 last night. Worked first time in high speed mode. That was a great suprise.
2005 Sierra Z71 SLT CCSB (LM7)
STS GT67, LPE GT 2-3, ASP Pulley, Delphi 42#, A'PEXi AVC-R, PLX SM-AFR, FLT Level 5 4L65E, PI Vig 2600, HP Tuners with 2-Bar SD OS (Plus some smaller mods)
Support our Troops