Awesome. I appreciate the feed back. I have been speaking to him and if he can't dial my car in correctly then I'm going to flash back to the whipple calibration and try editing over that.
Awesome. I appreciate the feed back. I have been speaking to him and if he can't dial my car in correctly then I'm going to flash back to the whipple calibration and try editing over that.
There are several people on this forum that can help you with the whipple tune
Last edited by LastPlace; 08-03-2018 at 08:48 AM.
Any 2018 aftermarket cals available?
@Eric@HPTuners for 2018 Aftermarket OS tuning and logging (whipple/roush) should we be using the 4.2.x now or do we need to use 4.3.x now?
Did you put in ID data for the injectors? I used their data and get -28 fuel trims for some reason. 2016 Whipple car on whipple OS
Does anyone have the Whipple 2.9 Gen3 tune for 2013-14 Coyote. I'm considering going back to a blower and I'm not sure how different the tune would be compared to the Roush, that I'm used to. I haven't done any tuning for the last year or so and I've forgotten a lot.
I was wrong I guess I always thought the roush stage 1 file would be n/a but I see its a supercharged filed.
hi, i need someone help
Mustang 2018 with ROUSH Supercharger
calibration file for MPVI1
thankyou.
Mustang 2018 original TC298.hpt
I have a question about using the Whipple OS.....
It had been touched on earlier in the thread about how the guardian/flare tool makes modifications on the fly. I noted when I used this function of my Whipple/Flare tool, it seems like you get a BCM reset. You can make the changes with the engine running....it's pretty nice when playing with boost/gear/ect.
Can someone please elaborate how this system works? I'm assuming there is a section in the OS on the PCM that points to the BCM? for boost by gear, revv limiter, ect that can be adjusted in the Flare tool. I have made changes with the flare tool, then did a re-read with HP, and there are no changes being made in the editor that I can see using compare function....so I'm very curious as to how this works!
Vehicle is a 2017 Mustang/Stage 1 Whipple kit.
'17 Whipple'd S550
Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw