Originally Posted by
TriPinTaZ
I ran into this with a 2018 ZL1 1LE Manual car
ENGINE > FUEL > CUTOFF,DFCO > RPM Limits > Misc > Commanded Torque
RPM Limit Torque vs RPM vs Gear
This table you would need to set Neutral to 6,042 (or another high number) or the car will never rev past about 5000 RPM in neutral. I believe that neutral counts for any gear if the clutch is depressed. But if it doesn't in your particular car you can set the whole table to max value and see if it gives you the desired result. If you're just trying to launch the car in 1st, try just 1st and neutral.
My client wasn't able to throw "mean revs" at the competition during roll races and parking lots in Mexico. Something I've never thought of lol. But I found this table fixed the "issue".