16 Ram 1500 5.7L w/ Stage 3 Cam, Unsure Where to Go From Here, Tunes/Logs Attached
So.... I have a 16 Ram 1500 with a fully built 5.7L and a stage 3 cam (223/232 , 113 +3 , .582/.582) with a phase lock, hellcat 92mm throttle body and all those mods that are available to us. I can get it to start and even run for a couple minutes, as it tries to hunt and find a steady idle but always seems to shut down after a couple minutes and Im not sure why. I will attach my last 2 logs as well as the tune its currently running on, I am also quite stumped as to where to go from here with my tune as well. The one that runs that I have attached is actually on NN. I have a tune Ive been working on using VE but when I load that tune, i can barely get it to start and if I do, it almost immediately dies right after. Ill attach this one if there is room to. Im hopeful that maybe one of the more experienced guys out there (which is most of you Im sure) will see something in my logs and/or these tunes Ive been working on for longer than I care to admit. Any help is appreciated!
Most recent Log with wideband running at idle. It started going a lil haywire on me there at the end as it was starting to settle, Truck had a great chop a couple month ago but i cant seem to get it back the same as it once was.
I posted a new thread last night. The motor seems to run just fine at idle in the driveway. But for some reason it?s showing trans engine torque request at 1141 ft/lbs and puts me in limp mode (3rd gear only). Not sure what to do from here.
Reply With Quote
