Hello everyone
New forum member looking for input on an HRT stage 2 cam on an 07 5.7. I have managed to get it to start and idle but the timing is al lover the map as is the RPM. I have attached the tune file and a start up log for your viewing pleasure.
down stream o2 are disabled as there are no cats, I do have a wideband but haven't figured out how to add it to the VCM scanner. For the most part its not lean anywhere and a rich at WOT. I can deal with that for now.
I did have a tuner lined up to tune it but has seemingly ghosted me so I have cobbled it together enough to get it to run and drive but obviously needs work.
Thank for any help you can give.