Hmmmmmm, nice catch. Gonna try that now.
Hmmmmmm, nice catch. Gonna try that now.
Tried putting in axis and column, and no change. Also, it seems like mapped points configuration is only using MP 0 for some reason? Here is a updated tune file.
Originally Posted by Cozmo2806
Everything in the VCT tab looks very comparable to my stock GT file.
One thing I noticed was in the axis values for OP Bend Distance. Yours has one RPM value, where mine has 2. Maybe try matching this:
Image 6.png
Can you elaborate those changes?
vct.jpg
I cannot.... honestly don't recall even going into those tables. I did send my ecu off to Eric to have the PATS turned off before I went down this path of self tuning.
I downloaded a stock 2013 F150 tune form repository to compare and you have a lot of changes. The reason of your disabled VCT is a mystery
See if you can change the cam angle. Who did the work on the car?
mp00.JPG
I've pretty much made 90% of the changes I have from the coyote cookbook. Yes it is a truck motor, but has the 11:1 pistons, and boss cams etc. Yes its very frustrating trying to find a lead on why the vct is not working. Starting to think its a wiring issue, but really am not sure.
Ok ill try that today. I did all the work on the build myself.
Was the TIVCT disabled issue ever resolved?
Reply With Quote