Originally Posted by
cstew00
New to the HPTuners world and have done a lot of reading, but still much to learn. Here's the story, I have an 05 Cobalt coupe (swapped in ECU/BCU, and engine from an 05 manual Cavalier) that I race dirt track with. (1/2 mile). I have made some of the adjustments that are in the sticky's and from other places that I have found on the web for things like PE and DFCO. The car is straight pipe with pre-cat 02 still in it. No mods to intake or fuel delivery yet.
What should I start to look at next... Or better yet, have I gotten everything correct in the attached file? Any and all help is much appreciated.
Oh, and here is a link to the heat race this past Saturday.. sorry bout the camera angle, and I am getting smaller tires to bring the RPM's up as it is only turning right at 6 going into the corners and seems sluggish coming back on the power out of the corners.
Thanks