-
Potential Tuner
1997 Ram JTEC no trans control options
Hello all. I'm somewhat new to the HPtuners platform. I have a project truck that is based on a 2nd gen Ram chassis including a 5.9 magnum and a 46RE.
The JTEC is from a 1997 Ram. It controls the trans fairly well other than I'm hitting rev limiter before my WOT 1-2 upshift. I pulled the tune from the PCM and I don't see any trans tuning options like I see in other people's JTEC tunes. Am I doing something wrong? Do these calibrations only exist in newer 1998+ JTECs? I'm could possibly swap to a 98-99 JTEC. My service manual tells me that the ECM pinout should work.
I've attached an image of the trans options I see.
1997 ram trans options.png
-
Potential Tuner
Adding the tune in question as well as a picture of my truck. It's a 1949 Chevy 3800 dropped on a 2nd gen Ram 2500 4x4 chassis.
PXL_20220910_225551810.jpg97 ram asfound.hpt
-
Potential Tuner
97 jtec has no trans tuning