0411 ecm on 96 5.7
Crank but no start Have power going to coil no fire
New crank sensor and no rpm signal
I used the 02 van 5.7 just copied and pasted to my file
0411 OG was 01 5.3 suburban
Need help there is power on the pink and brown wire for ignition
Got the wiring from Lextech great job easy to do
Pins are all secure
Little stuck
Pretty sure you will need to actually flash the computer with a 5.7 file because just a copy paste isn't going to cut it.
I'd use a GM tool to flash it with the correct operating system/file so you don't waste more credits on and risk a screw up.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Hell I’m sitting here with hp tuners
What tool did you use
Plus if already used 2 credits
I did the 02 van 5.7 and runs good but will not start
You have to give it half throttle and idles like crap
Got it to start, then dies and just won?t idle
96 5.7 os Tommys 1500.hpt
96 0411 Swap 5.7.hpl
Reply With Quote