Hp isn't displaying alot of my pids from my engine I tried deleting my vehicle file from folder and still nothing but on my tdn it shows water temp and rpm. Thanks in advance
Hp isn't displaying alot of my pids from my engine I tried deleting my vehicle file from folder and still nothing but on my tdn it shows water temp and rpm. Thanks in advance
Have you tried turning it off and back on again?
Repoll for parameters?
Should I mention that it's a Chinese harness but I checked all wiring and they are good and they are all factory original sensors
More info on what your project is might be helpful.
It's a 2001 untuned lq4 truck norris cam with factory cpu with stock 4l80e
IF YOUR PIDS ARE SETUP FOR A LATER VEHICLE, ITS LIKELY LOOKING FOR THE WRONG PIDS. YOU MAY HAVE TO MANUALLY RESELCT THE PIDS AND TRY AGAIN. oNLY TIME IVE SEEN THIS IS WHEN INCORRECT PIDS WERE CHOSEN
Michael Bray
Rusty Knuckle Garage
Slidell, Louisiana
20yr Master Tech.
Advanced Level Specialist
Custom Car Fabrication, Customization, High Performance.
GM World Class Technician
Shop Owner
This is what I'm getting
Last edited by chevyballer; 10-13-2022 at 02:42 PM.
If you click connect to vehicle at the top left and then click "vehicle" and everything is still greyed out, there has to be something wrong within the software.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.