If I increase the shift schedule in my 1320 tune to 6450 or 6500, will the OSS table clip it, or is it a non issue in auto mode ? I am not clear on the output shaft speed limits and when they are applied. And what happens when they are applied ? I have read other descriptions but it is not clear... yet.
I notice the OSS upshift rpm per shift is set accordingly vs the gray table on the left in the stock 1320 table. I understand how to calculate it vs gear ratio.
Some of the left hand gray'd out tables in other tunes (OSS tune 1 for example) have different values I notice, up to 7000 rpm, plus in some other tunes (besides these) the OSS speed vs upshift values are whacked out or mismatched, not set accordingly vs the gray's out values on the left....is the best way I can describe it.. .. That is highly confusing.
Are the gray'd values on the left adjustable with diablo CMR software rather that HPT ?
Sorry for the rookie questions
Thanks