Results 1 to 7 of 7

Thread: some tables [READ ONLY] after updating to 5.0.4?

  1. #1

    some tables [READ ONLY] after updating to 5.0.4?

    I have some tables that I can't configure anymore after updating to 5.0.4 (I didn't notice it until now).

    The tables show [READ ONLY] after the description in the window title and are not editable. How do I fix this? Attached is a screenshot of the tables.

    2019 RAM 5.7L ZF8 tranny.

    hp_tuners_read_only.png

  2. #2
    I went back to 4.11.1325 Beta and this isn't an issue for anyone having issues with this.

  3. #3
    alright I lied, I thought it was a fix but I can't actually edit any of the values in the tables in the beta version. 5.0.4 looks like it fixed the bug of not showing [READ ONLY]. Going to contact support.

  4. #4
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,482
    5.x anything requires you to sign your soul away to the EPA first.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  5. #5
    exact problem I am having. My Tuner changed those tables and I no longer have sport mode (did it a couple years ago). I finally found someone willing to help me get it back and those tables are now read only. WTF???

    In fact looking at 30004 I think the same person tuned ours. Mine is a Challenger R/T

  6. #6
    Potential Tuner
    Join Date
    Feb 2023
    Location
    West Haven, UT
    Posts
    7
    im having the same issue with the misfire table. i need to raise the value to see if i can get it to stop going into open loop fault but it says read only and the setting in the tune are not the same as the stock tune

  7. #7
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    7,113
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC