Results 1 to 1 of 1

Thread: Cam tables zero at idle but I still see 4 degrees?

  1. 04-10-2023 #1
    GapRider
    GapRider is offline
    Advanced Tuner GapRider's Avatar
    Join Date
    Nov 2015
    Location
    South Carolina
    Posts
    246

    Cam tables zero at idle but I still see 4 degrees?

    I zeroed out my cam tables at idle but I still see ~4 degrees cam position at idle sometimes.
    I set all ECT correction multipliers to 1.
    I can't find anything else in the tune that does not tell the cam to be at 0 degrees at idle - what am I missing?

    2019 6.2 C7 with long tube headers, off road x-pipe

    no EGR.JPG 4 degrees.JPG
    F1B1m11e2-STOCK-HPFP05-NO EGR-idling.hpl
    F1B1m11e2-STOCK-HPFP05-NO EGR-idling.hpl F1B1m11e2-no EGR cam angles-IN CAR.hpt
    Last edited by GapRider; 04-10-2023 at 05:21 PM.
    2019 C7 Stingray M7 - long tube headers, 6.30/6.22 226/238 cam, supporting stuff, DOD and VVT delete.
    Stock everything else
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »