Is there a way to see in the hp scanner, if the srv switch is opening the short runners? I have a 5.7 with the 392 manifold and the mmx short runner actuator that connects to the canbus of the car and was wondering if i could detect if it where activating.
2019 challenger rt
92mm hellcat throttlebody
ported 5.7 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers
Vs 78/75 turbo
e-85 tuned
3.70 lsd
There short be something in the channels list but I'm not sure if it works with a manifold swap. I'm interested to hear if it does.
Screenshot 2023-04-23 113109.png
Pro link external input would show power or lack thereof
I dont have the pro link, but if i did, how would i set up the scanner to see it?
2019 challenger rt
92mm hellcat throttlebody
ported 5.7 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers
Vs 78/75 turbo
e-85 tuned
3.70 lsd
In the scanner there is channel for the intake runner in percentage.
This shows 78% in my 6.4 swap, no matter what rpm.
alfaobd can activate the runner by test, so its functional.
I try to find a way to get the rt ecm to work with the srv.
In Hp there is the button srv equipped, but its useless and doesnt work.
Not sure if you're still around, but how are you using AlfaOBD to test the srv?Originally Posted by f.creek-ranch
Reply With Quote