Hi all! Guys, I need help with the Torque management section.
Car - chrysler 300c srt8, 6.1 + 2 x 3582 garrett 3582GTX, 22PSI, ~1200hp/1600nm.
I'm trying to find the optimal parameters so as not to destroy the third transmission. Spark and ETS cutouts work, but I don?t know about fuel. I'm interested in the very essence of whether it is worth using this parameter on a turbo car, when the setting is on, it just jerks and shakes (I changed the "FSO enable torque" table, it's of little use).
Last year I drove with the TM completely off, now I changed my mind, but the gear shift is stuck at high boost (> 15psi)
Before writing, I experienced many changes in the TM engine and TM transmission section, but did not get clear results. Torque reduction tables - upshift - do not give anything.
- spark in different gears is not always retards
Throttle doesn't work at all
Actual torque drops, but this does not help the transmission.
Help me please. AT won't forgive me for 10 more failed attempts)
29 (1).hpt19052023 2.hpl