Hi all, new to the modular tuning world as I was coming from the ancient binary editor/ moates quarterhorse tuning. I just finished up my Gen3 coyote swap using a 2019 F150 engine and a Mustang gen 3 manual control pack. Motor is completely stock (stock f150 cams) but 18+ mustang intake and with the exception of a custom 4" style CAI/MAF housing and full 3" longtube exhaust. My control pack ECM was flashed by PBH to compensate for the F150 firing order so I can use the Mustang control pack. Had I known how simple it would be to change a fire order in HPTuners I would have just done that myself as I just purchased a MPIV3. I honestly just need to disable the CMCV/IMRC's but now that I have the hardware I can dial in my MAF curve and fuel and play with the cam timing too. I know there are plenty of different ways to modify the IMRC's, and I read plenty of gen2 threads but I would want to keep the knock sensors functioning and have it drive to as stock if possible. I have 3 codes currently and they are all related to the CMCV's. I would have just kept them but there was no way they would fit or clear. I was wondering if someone could help guide me on this?