Results 1 to 3 of 3

Thread: TCC Slip Not Available?

  1. 07-01-2023 #1
    Mc77
    Mc77 is offline
    Potential Tuner
    Join Date
    Jun 2023
    Posts
    8

    TCC Slip Not Available?

    I'm new to tuning, so forgive me if I dont know what im talking about.
    Working on my 2016 sierra 5.3 6l80 2wd
    I did the cam and lifter dod delete. stock non dod cam.
    also got a nice torque converter (protorque lsxt) with slight stall, 2600
    i am using a friends hpt interface, MPVI2 . I have done quite a bit of reading and youtubing.
    seems like everyone reccomends zeroing out the TCC slip. and disabling lockup in 1st thru 4th.

    my problem is, i dont see the option to change TCC slip at all.
    I think I may have a new version of VCM Editor ??
    Any ideas?
    Reply With Quote Reply With Quote
  2. 07-01-2023 #2
    5FDP
    5FDP is offline
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,621
    Make sure you are in advanced view under the edit tab.

    TCC desired slip is in the torque converter tab.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.
    Reply With Quote Reply With Quote
  3. 07-01-2023 #3
    Mc77
    Mc77 is offline
    Potential Tuner
    Join Date
    Jun 2023
    Posts
    8
    thanks.
    exactly what i needed.
    only waisted a couple hours trying to figure that out...
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »